1.Start to setup In PPsmart app, tap Add Device in home, or tap the + plus sign on the top left then tap Add Device.
2.Turn on your device Unplug waterproof plug. Press and hold the Power button at the bottom for 5 seconds until the "Hello" startup sound plays and the blue light is on.
3.Reset your device Press and hold the RST button at the bottom for 5 seconds, until the blue light flashes, the prompttone sounds, and the camera begins to wait for Wi-Fi connection.
4.Connect to network PPnest devices only work on 2.4 GHz Wi-Fi networks. If you are connected to a 5 GHz network, switch to a 2.4 GHz network in router.
5.Scan the QR: Use the camera to scan the QR code from 8-12 inches away. Slowly move the QR code on the screen away from the camera, then closer.When the camera reads the QR code, it will send out a voice prompt and the indicator will flash quickly.
6.Name your device Now, the device is added, the status light turn solid blue. Name your Cam.
7.Set Cam Plus service : Cloud storage service, record upload to cloud once motion detects. You can view the historical video anytime, anywhere even if the device is damaged, stolen, or disconnected.No charges until the trial period expires.
*Install the camera
Hang Camera 2-3meters above the ground. This height maximizes the detection range of the motion sensor of Camera.
*Install the solar panel
Keep the installation angle of solar panels about 30-45° with the horizontal plane.Open up the silicone cover at the bottom of the camera, insert the power cord through the opening and plug it into the USB-C Port and then close the cover.
*Contact us
If you have any other problem PPsmart Support Team will be there for you. Email service@ppsmart.com or open PPsmart app, click "Me"-FAQ & Feedback.